52W Mark V – Week 32: Johannes (“Jan”) Woltering

Jan Woltering (1788-1834)

All but six of of my 32 Dutch Great x4 Grandparents were born in Noord Holland. Of the six, four were born in what is now the Netherlands and one, Johannes Puinbroek who I wrote about in Week 26, was born in what is now Belgium only a few kilometers from the Dutch border.

To me, the real outlier is my Great x4 Grandfather Johannes (“Jan”) Woltering, who was born in Vreden, North Rhine-Westphalia. While Vreden now sits less than four kilometers from the Netherlands, in the area known as the Achterhoek, it is located in what is now Germany and has never been part of the Netherlands.

Jan also had the longest handle of all my direct ancestors. On March 3, 1788, he was baptised Johannes Henricus Antonius Albertus Woltering. No wonder he simply went by “Jan”. Granted, I’m not one to talk, since both our kids have three middle names.

Church register showing Jan’s baptism. Or should I say Johannes Henricus Antonius Albertus’s baptism?

Jan’s parents were Gerard Woltering and Maria Francisca Wissing, who married in Vreden in 1787. Immediately prior to their marriage, Gerard lived in Buurse, Overijssel, which is less than three kilometers from the German border and less than 12 klicks north of Vreden. Other than that, I have not yet discovered anything about Gerard and Maria prior to the year they married or whether they were actually Dutch or German.

What was also a surprising discovery to me is that, apparently, Gerard’s occupation was boatbuilding. I am unsure where he carried out that trade, given that the closest large body of water to where Gerard lived and married is at least 100 kilometers away. I have to assume he worked on smaller craft, such as barges or boats for canals or rivers.

Sometime around 1800, Gerard and Maria were living in Enschede, Overijssel, about 20 kilometers north of Vreden. Maria died in Vreden in 1803. I don’t know when or where Gerard died, but it occurred sometime before Jan married in 1814.

I also know nothing of the first 25 years of Jan’s life. By 1814, he was living in Akersloot, Noord Holland, working as a carpenter. I have no idea what motivated the move, particularly given the significant distance, especially at that time. Even now it’s a three-hour drive between Vreden and Akersloot. Sure, that’s not much to me as a Canadian, but it’s quite considerable in the Netherlands!

On September 4, 1814, Jan married Antje Boekel in Noord-Scharwoude, Noord Holland. At the time of the marriage, Jan was working as a carpenter in Langedijk, the municipality of which Noord-Scharwoude was a part. However, by July 1815 he and Antje were living in Akersloot, when they had their first child, Cornelis, my Great x3 Grandfather.

The registration of Jan and Antje’s marriage in the civil register. Civil registration was still relatively new at the time of their marriage, which was introduced by the French. In fact, when Jan and Antje married, the Netherlands was still incorporated into the French Empire, so it is interesting to see the lack of reference to the organization of the municipality under the French system.

The family did not remain in Akersloot for long, as they had their second child in Zaandam, a town on the northern outskirts of Amsterdam. The sojourn in Zaandam was not long, either, as the family was in Zuid-Scharwoude as of 1820, where Antje gave birth to the couple’s three youngest children.

For the rest of his life, Jan continued to work as a carpenter. Many years ago I found a reference to Jan having worked as a watermill worker at an unspecified time. Unfortunately, the source where I found that was an index, not the original record, and the site where I found it no longer exists.

Jan died relatively young, on November 2, 1834 in Zuid-Scharwoude. He was only 46.

Registration of Jan’s death.

52W Mark II – Week 36: Tradesperson

The vast majority of my ancestors on both sides of my family were farmers or labourers. Not all the labourers were agricultural workers, but it was still hard work and far from what might be considered a trade.

There are a few interesting exceptions. Cornelis Jan Bakker, my great great grandfather, was a cobbler. I also discovered that my Gx9 grandfather, Gregory Cooke, was a cordwainer. A cordwainer is a shoemaker who specializes in fine, soft, new leather shoes, in contrast to a cobbler, who works with old shoes. I’ve also written about my great great grandmother, Ella Elizabeth Thomas, who was a midwife in Cardston, Alberta, for more than 40 years.

What caught my eye in thinking about the topic for this week’s 52 Ancestors Challenge, “Tradeperson”, was an interesting branch of my family on the Dutch side of my family tree.

Almost all of my Dutch ancestors who I have identified to date are from the provinces of Zuid-Holland and Noord-Holland, which prior to 1840 were one province, Holland. So I was quite surprised to learn early last year that I have a branch of my family that originates in the Achterhoek (literally, “back corner”), the easternmost part of the province of Gelderland that pokes into Germany.

My paternal grandmother was Christina Komen. Her paternal grandmother (my great great grandmother) was Antje (“Anna”) Woltering. Anna’s father, Cornelis, is one of my few ancestors who can be described as a tradesperson. As far as I have discovered, he was a carpenter almost all of his entire adult life. The earliest mention of his occupation was in the registration of his marriage to his wife Neeltje Smit, which occurred on May 8, 1842. It is most likely that Cornelis was a carpenter, or a carpenter’s apprentice, for many years before he married.

While it seems that Cornelis spent most of his life, including his years as a carpenter, in Zuid-Scharwoude, Noord-Holland, he was born about 15 kilometers to the south in the village of Akersloot. How this came to be I have no idea. His parents, Johannes “Jan” Woltering and Antje Boekel, had married in Noord-Scharwoude in 1814 and all of Cornelis’s younger siblings were born in Zuid-Scharwoude. However, it appears that Jan had been living in Akersloot prior to marrying Antje. It may be that the couple returned to Jan’s residence after they married and relocated to Antje’s home town of Zuid-Scharwoude shortly after Cornelis was born.

The bigger surprise to me was that Cornelis’s father, Jan, my Gx4 grandfather, was born in 1788 in what is now Vreden, North Rhine-Westphalia, Germany. Vreden is about three kilometers from the Dutch border and the Achterhoek. Sometime before September 1814, when he married Antje, Jan literally moved across the Netherlands to Noord-Holland. I have no idea why he moved, which was incredible because it was unusual for people to move such distances at that time. Even now it’s about a three-hour drive, which to many of my Dutch relatives is an astounding distance. (For a Canadian, not so much!)

I have not yet determined where Jan’s parents, Gerard Woltering and Maria Francisca Wissing (Cornelis’s paternal grandparents), were born. Gerard and Maria married on April 26, 1787, in Vreden. However, prior to the marriage, Gerard had been living in Buurse, Overijssel, Netherlands. Buurse is three kilometers from the German border and twelve kilometers due north of Vreden. Meanwhile, Maria had been living in Enschede, Overijssel, which is a city about 20 kilometers north of Vreden.

What is more surprising is that Gerard’s occupation was boatbuilder. I am unsure where he carried out that trade, given that the closest large body of water to where he lived and married is at least 100 kilometers away.

Cornelis’s maternal grandfather, and Antje’s father, was Willem Crelisse Boekel, was also a boatmaker. However, unlike Gerard, Willem lived rather close to the water, as he spent his entire life in Noord-Holland.